Oxygen Analyzers
Location：Home >>Products >>Oxygen Analyzers
ParametersProduct featuresApplication fieldOrderingLeave a Message
Measure Range: 0-10/100/1000ppm/25% O2 FS ranges;
Sensor Type: New Zirconia type;
Accuracy: <±2% of FS range under constant conditions;
Application: Oxygen analysis from 0 ppm to 25% in inert gas streams;
Approvals: ISO9001:2008;
Area Classification: General purpose
Alarms: 1 adjustable form C relay contacts non-latching;
Calibration: Certified gas of O2 balance N2 approximating 80% of range above analysis
range recommended for optinum results; Two points calibration;
Compensation: Barometric pressure and temperature; optional heated sample system and
sensor housing;
Connections: 1/4'' or 1/8'' compression tube fittings;
Controls: Menu driven calibration, alarm and system functions;
Display: Graphical LCD 320×240MM; resolution 1ppm
Enclosure: 127(H)×266(W)×278(D)MM;
Flow Sensitivity: 2~2.5L/min recommended;
Pressure: Inlet - regulate to 0.5~2 bar, Vent-atmospheric;
Power: Universal: AC110~264V AC, 50/60Hz;
Response Time: 90% of final FS reading < 10 seconds;
Sample System: Flow indicator;
Sensitivity: <0.5% of FS range;
Sensor Life: 48 months at 25℃ and 1 atm;
Signal Output: 4~20mA non-isolated or 0-10V (optional), etc.;
Temp. Range: 0~50℃;
Warranty: 12 months analyzer; 12 months sensor.
Fast response new Zirconia type sensor;
Signal output 4-20mA or 0-10V (optional), etc.;
Adjustable concentration alarm points with programmable relay function;
Full duplex RS232 communication port;
Universal power supply 110-230V AC 50-60Hz;
Extended-life, maintenance-free sensor;
No maintenance.
N2 wave soldering/reflow soldering ovens;
N2 furnaces;
Air separation;
Gas purity settings;
Sealed used inert gases;
Ferrite sintering kiln;
Semiconductor manufacturing.